1. Let the mixing tank run at full speed for oneortwo minutes since the loading mixer is unloaded. Allow the concrete to be fully mixed. If necessary, add some water to make the concrete mix more evenly and facilitate unloading.
2. The mixing tank of the self loading mixer must be washed carefully. Wash the cans carefully, and repeat the positive and negative rotation of the water twice, and then put it out. Put all the water in the water tank into the cans once, and then return to the station to add water to clean the cans.
3. Don't be careless in discharging and have a good relationship with the discharging worker. Watch by yourself when discharging, so as to avoid the discharging worker's disorderly operation of the discharging lever. Stop every time when the tank of the charging mixer is reversing the middle position, and protect the reducer, supporting wheel, etc. Have a good relationship with the discharging workers, and don't sleep too well when discharging. In case the workers are in a mood, put your self loading mixer on the construction site without turning the cans, causing trouble in stuffing the cans.
4. Wet the chute of the discharge hopper before discharging. When discharging, park the car on the flat ground as far as possible, and wet the chute of the discharge hopper before discharging, so as to facilitate cleaning.
The above is a detailed introduction to the automatic feeding mixer, which I hope will help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://www.qiqucity.com/